Skip to content

Turn guardrails off and on

Purpose: in a rare incident (a pattern that suddenly blocks every call, say) you may need every guardrail out of the way at once while you fix the cause. Guardrails on is that switch, for the whole gateway. It's deliberately visible: while it's off, everyone who manages guardrails sees who turned it off, since when, and a link back.

For anything smaller, prefer a narrower tool: pause one rule, lift one guardrail for a few hours, or exempt one key.

Two switches, two effects

Switch Where What it stops
Guardrails on, off Settings › VidaiGuard on Enterprise, whether VidaiGuard is set up or not; Settings › Guardrails on Community Every check: neither patterns nor VidaiGuard check any call, whatever the policies say
VidaiGuard checks on, off Enterprise Settings › VidaiGuard VidaiGuard checks only: pattern checks keep running on every call

Before you start

  • You're an organisation admin.

Steps

  1. Open System › Settings and choose VidaiGuard (on Community, Guardrails).
  2. Switch Guardrails on off. There's no confirmation: it takes effect straight away, and the line under the switch reads "Off: …".
  3. When the cause is fixed, switch Guardrails on back on.

Turning guardrails off from Settings, seeing the notice on Guardrails, and turning them back on

Check it worked

While guardrails are off, Guardrails › Overview and Rules say so at the top: "Guardrails are off: neither patterns nor VidaiGuard check any call, whatever the policies say." (on Community: "Guardrails are off: no pattern checks any call, whatever the policies say."), with who turned them off, since when, and a link to the switch. A notice at the top of every page says guardrails are off.

When they're back on, the notice goes.

Good to know

  • Group admins can't read the switch, so they don't see the notice on Guardrails.
  • Rules keep their settings while guardrails are off; nothing has to be set again.
  • Until an admin changes it, the gateway keeps its own configuration for this switch.